Ion Controls Launches Complete Scada HMI Solution

Ion Controls has introduced a complete Scada human-machine-interface (HMI) solution suitable for process engineers, building controls systems integrators and operators. Ion Vision, an integrated development and operation environment, features advanced graphics capabilities and zero-maintenance data logging, together with a high-performance communications engine to deliver a low-cost Scada HMI experience. Switching between designer mode and operator mode in screens is a matter of a single keystroke.

Definitions are always accessible and can be changed without restarting Ion Vision. Access to the design features can be hidden to prevent operators from making changes to the project. Projects in Ion Vision are said to be quick and simple to set up. All definitions, such as aliases, alarms or trend variables, are done in tables, allowing the user to export and import data, search and replace values, sort through the definitions or make global changes using the Express Edit feature. Ion Vision is designed to facilitate all tasks involved in creating and designing projects.

According to the company, Ion Vision always stays responsive, even while performing lengthy tasks such as fetching records or searching for data, and features a streamlined, clean interface. The scalable solution does not limit, either by licence or technology, any aspect of a project. It has been field tested in installations using tens of thousands of input/output (I/O) points, hundreds of reports and trends and thousands of alarms.

Numerous protocol drivers are available as standard, including Modbus and OPC. Each system includes all the required development tools. Customers can download Ion Vision online and use it for up to 30 days without any limitations. When the evaluation period has passed, the customer will be required to purchase a licence in order to continue using Ion Vision.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more