Oscilloscopes For High-Frequency Power Measurement
Yokogawa has revealed that the G4 power measurement option on its digital and mixed-signal oscilloscopes can be used to carry out high-frequency power measurements in switched-mode power supplies. These measurements can now be carried out with greater accuracy using a de-skew correction signal source, along with voltage and current probes, in conjunction with the G4 option. Although power management using an oscilloscope is fundamentally less accurate than using a digital power meter, it offers much higher bandwidth.
It is particularly suitable for measuring high-frequency switching losses in switched-mode power supplies. It also provides a power management capability using a general-purpose product that has other uses - an option that may be more acceptable to users who are not ready to invest in a true power meter or have limited budgets for test equipment. The de-skew correction signal source is an accessory that is specifically designed to maximise the measurement accuracy of oscilloscopes when they are used for power measurements involving fast switching devices and high-frequency waveforms.
To correctly measure power-supply parameters such as power, impedance, power factor, watt-hours and ampere-hours from the voltage and current under analysis, the voltage and current signals must be applied to the signal input terminals of the oscilloscope with no difference in the transfer time. The signal source corrects the potential delays between voltage and current channels in combination with the auto de-skewing function provided as part of the G4 option.
The unit produces an output voltage from 0-5V and an output current of 0-100mA (for low-current measurements) or 0-1A (for high-current measurements). It has a fall time of approximately 25ns (low current) or 250ns (high current). The fixed time difference between voltage and current is 2.3 +./- 0.5ns (low current) or 14.5 +/- 1.0ns (high current). Its power supply of 5VDC/100mA is taken from the oscilloscope via a USB cable. The de-skew correction signal source supports through-type current transformers and a variety of clamp-on current probes.
It is particularly suitable for measuring high-frequency switching losses in switched-mode power supplies. It also provides a power management capability using a general-purpose product that has other uses - an option that may be more acceptable to users who are not ready to invest in a true power meter or have limited budgets for test equipment. The de-skew correction signal source is an accessory that is specifically designed to maximise the measurement accuracy of oscilloscopes when they are used for power measurements involving fast switching devices and high-frequency waveforms.
To correctly measure power-supply parameters such as power, impedance, power factor, watt-hours and ampere-hours from the voltage and current under analysis, the voltage and current signals must be applied to the signal input terminals of the oscilloscope with no difference in the transfer time. The signal source corrects the potential delays between voltage and current channels in combination with the auto de-skewing function provided as part of the G4 option.
The unit produces an output voltage from 0-5V and an output current of 0-100mA (for low-current measurements) or 0-1A (for high-current measurements). It has a fall time of approximately 25ns (low current) or 250ns (high current). The fixed time difference between voltage and current is 2.3 +./- 0.5ns (low current) or 14.5 +/- 1.0ns (high current). Its power supply of 5VDC/100mA is taken from the oscilloscope via a USB cable. The de-skew correction signal source supports through-type current transformers and a variety of clamp-on current probes.
Comments