Honeywell Software Improves Manufacturing Cycle

Applied Extrusion Technologies (AET) has selected Honeywell's Optivision Business Logic software to help improve production while reducing costs at the plastic film maker's North America plants. AET is using the Optivision manufacturing execution system (MES) to control production costs by forecasting its raw material usage, improving its planning and scheduling processes and managing production execution and quality. The upgrade is part of AET's overall effort to standardise its IT infrastructure and refresh its business systems.

AET manufactures biaxial oriented polypropylene plastic films used in consumer goods packaging, product labelling and building products. 'We reached the point where supporting our legacy software did not make business sense due to increasing demands on our IT resources and risk of compromising our manufacturing capabilities,' said Jim Burger, IT manager, AET. 'Our customers cannot afford issues such as production delays or failure to meet order requirements. 'Honeywell's solutions will help us decrease those risks and keep our customers satisfied through standardised IT functionality and alignment with our business goals,' he added.

Optivision reduces operational costs by integrating trim optimisation, quality, scheduling, shipping, tracking and order management capabilities. As a result, manufacturers can control the entire opportunity-to-cash cycle using a single platform. AET will use Optivision to integrate production data to streamline its manufacturing process, from accurate planning and order scheduling to final production. This is expected to result in decreased raw materials consumption, improved scrap handling, planning and scheduling, as well as minimised late-order exposure.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more