T-slot Cylinder Sensors with Integral M8 Connector

Easy installation: quick wiring via M8 connector.
  • Direct connection on the housing for continuous wiring.
  • Self-locking mechanism for easy single-handed installation.
  • Sensing face at the housing front ensures good detection of the end position.
  • Wide range of accessories for different cylinder designs.
  • Stable connector and robust fixing.
The family is growing
The T-slot cylinder sensor with integral M8 connector on the housing is available as an electronic version or with a reed element. In addition to the two flat standard versions designed for C-slots and T-slots, further applications can now be conveniently implemented thanks to the new design. Thus, the sensor can for example be easily wired from the control cabinet to the cylinder in special machines. The position of the M8 connector on the sensor results in space savings in the cable duct. Furthermore, the entanglement in cable loops is minimized.

Good fixing and easy installation
The ifm sensor has the following advantages: self-locking mechanism, strain relief, drop from the top into the slot, adapters for further cylinder types.

Applications:
T-slot cylinder sensors for use in industrial environments such as packaging and handling machines or special purpose machinery.

M8 connector on the housing · output function NO · 3-wire
MK5900 - cylinder sensor with AMR cell, Plastic housing for T-slot cylinders, DC PNP, normally open, non-flush mountable, IP 65 / IP 67, Ambient temperature -25...85 °C, M8 connector, (snap-fit)

M8 connector on the housing · output function NO · 3-wire
MK5902 - cylinder sensor with AMR cell, Plastic housing for T-slot cylinders, DC NPN, normally open, non-flush mountable, IP 65 / IP 67, Ambient temperature -25...85 °C, M8 connector, (snap-fit)

M8 connector on the housing · output function NO · 2-wire
MR0901 - Cylinder sensor with reed contact , Plastic housing for T-slot cylinders, AC/DC PNP/NPN, normally open, non-flush mountable, IP 65 / IP 67, Ambient temperature -25...70 °C, M8 connector, (snap-fit)

M8 connector on the housing · output function NO · 3-wire
MR0902 - Cylinder sensor with reed contact , Plastic housing for T-slot cylinders, AC/DC PNP , normally open, non-flush mountable, IP 65 / IP 67, Ambient temperature -25...70 °C, M8 connector, (snap-fit)

Comments

Post a Comment

Popular posts from this blog

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more