3D Printer Maker Stratasys Expands Automated Support-Removal Process for Polycarbonate Material

Stratasys says it will expand its WaterWorks soluble support material to be compatible with its polycarbonate build material (PC-10) for Fortus 3D Production Systems.

Previously, WaterWorks soluble support material was available exclusively for the company’s ABS-based material formulations.

The soluble support material – SR-100 – allows automated, hands-free removal, resulting in more efficient prototype and part production. SR-100 soluble support material will also enable a finer layer thickness. By combining PC-10 build material with SR-100, users can now produce parts in 0.005 in. (0.127mm) layers, for finer feature detail and smoother surface finish. This layer thickness setting was previously unavailable for PC-10.

Beta test user Joe Gibbs Racing previously used PC-ABS because it was the strongest material that could be coupled with soluble supports. Combining the SR-100 soluble support structure with polycarbonate build material allows JGR to use the more robust polycarbonate. This enables JGR to use its Fortus machine for more applications, giving it a faster return on investment.

JGR Design Engineer Brian Levy says he likes the superior mechanical properties of polycarbonate. The team makes a polycarbonate filter component with the FDM process, using the PC-100 soluble supports.

“The soluble material is more efficient to remove than the old break-away supports, so we’re now using polycarbonate regularly,” Levy says. “All of our cars have the PC filter component, and they use them every week.”

The soluble support material eliminates the process of manual removal with hand tools. The dissolved support material is washed away in a solution of heated-water and cleaning agent. It can take as little as 30-120 minutes to dissolve an SR-100 support structure in an agitation or ultrasonic tank.

The SR-100 soluble support material will be available for the Fortus 360mc, Fortus 400mc, Fortus 900mc, Fortus eV and Fortus eT systems. SR-100 is expected to ship in Q1 2012.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more