Brush-On Finishes Create Rich Tones - Ideal For Ornamental Fabricators, Sculpture Artists And Fabricating Shops

Brush-On finishes create rich tones for copper, brass, steel and aluminum using Birchwood Casey's proven decorative finishes. Fast and easy to apply, these brush-on coatings provide attractive, decorative finishes for sculptures, ornamental hardware, and fabricated products and components. Choose from these unique Birchwood Casey Brush-On Finishes:

Antique Black® M24 Brush-On

Here's a unique brush-on concentrate ideal for blackening or browning of brass, bronze or copper alloys. It produces pleasing US10B finishes on large architectural surfaces, sculptures and engravings – either new or reconditioned components. Reaction speed and finish color is easily controlled by diluting the concentrate with water. Can be used undiluted for black finishes or diluted 1-50 percent for slower reactions and lighter, brown tones.

Aluma Black® A14 Brush-On

Designed just for aluminum alloys, this unique brush-on provides a durable, smooth black finish. Easily applied undiluted to blacken entire parts or use as a touch-up for black anodized parts that have been damaged or re-machined. Ideal for all types of aluminum parts including engravings.

Presto Black® BST4 Brush-On

Time-proven for most steel components, this brush-on is designed for application on any size part in limited quantities. It solves the application challenges of liquid products while producing an attractive, high quality, durable black finish. Can be sealed easily with a rust-preventative for extra finish protection.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more