PSU Increases Reliability & Reduces Noise

Powerstax, one of Europe’s leading value-added power solutions manufacturers, announces the availability of a convection cooling option for its N-03751-PFC Series of ultra-compact AC-DC switching power supplies. The N-03751-PFC Series is designed for outdoor and semi-sealed industrial applications and low noise office environments and its low profile will suit 1U rack mounted systems.

The new convection cooling option delivers 260 watts of output power across all output voltages and eliminates the fans and fan controllers required to cool conventional power supplies. The convection cooling option reduces costs and frees-up valuable system real-estate. As the Powerstax N-03751-PFC does not require forced air for full 260W operation, the system designer no longer has to be concerned with channelling air over the PSU, simplifying thermal design. Removing the fans also significantly increases the reliability of the Powerstax N-03751-PFC and reduces audible noise of end products, making them ideal for office environments.

Where an end system may be used in different environments, customers can simplify system level design by specifying the convection cooled Powerstax N-03751-PFC and if required substituting the forced-air cooled version which offers the same very compact, low profile 5×7.7×2.3mm (3.3x5x1.5”), packaging, connectors and layout, saving design time and costs.

“Powerstax power supplies are inherently reliable.” Says Tim Worley, CEO of Powerstax plc. “Since the reliability of a power supply is in many cases degraded by the reliability of its cooling fan, the introduction of this range of compact convection cooled power supplies offers our customers a very real increase in reliability with added packaging and cost benefits. Convection cooled power supplies reduce overall system power consumption and cooling requirements and are not susceptible to failures due to dust clogging fans or airborne contamination of their circuit boards.”

The synchronous rectification technique of the Powerstax N-03751-PFC Series delivers exceptionally high efficiency, up to 93% in some models and all models feature active current sharing allowing up to four power supplies to be operated in parallel for high output power applications. An optional active OR-ing mosfet board is also available for N+1 redundant applications. Both 5V standby and 12V auxiliary outputs can be wired OR-able when the main output is disabled.

The Powerstax N-03751-PFC Series has a very compact footprint of 3.3” x 5.0” (83.8mm x 127.0mm) and low profile of 1.5” (38.1mm) suitable for use in 1U racks, an active PFC input over the range 90–264 VAC, an operating temperature range of –25ºC to +50ºC and meets a full range of international agency requirements, including RoHS, UL, DEMKO, CE Mark and FCC Class B. Output is protected against overvoltage, overpower, short circuit and over temperature.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more