AVT Prosilica GX3300: High Resolution Imaging With No Compromise on Speed

The AVT Prosilica GX3300 features the new quad-tap Kodak KAI-08050 CCD progressive scan sensor which provides exceptional image quality, high sensitivity and dynamic range, improved anti-blooming and reduced smear. Dividing the sensor into a four quadrant parallel readout allows this device to support an impressive 17 fps at 8 MP. AVT Prosilica The GX3300 is equipped with an F-mount to make full use of the 4/3” optical format and is compatible with a wide-range of high quality commercial and industrial lenses.

AVT Prosilica GX3300 features Link Aggregate Groups (LAG)

The AVT Prosilica GX3300 is the latest camera in the Prosilica range to feature Link Aggregate Groups (LAG), or IEEE 802.3ad, a well-established computer networking technology. This links two Ethernet ports to provide data transfer of 240 MB/s, twice that achieved using a conventional GigE Vision configuration.

Optimised thermal management for industrial Machine Vision

The industrial camera is supplied in a compact, ribbed camera housing, specially designed for heat dissipation. With its rugged enclosure and optimised thermal management, the AVT Prosilica GX3300 delivers high quality images even in tough environments with temperatures up to 50°C.

Comments

Post a Comment

Popular posts from this blog

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more