AV Integrator AGELEC Selects Matrox Mura MPX Series to Power Integrated Video Wall Controllers

Matrox Graphics Inc. today announced that French AV integrator AGELEC has chosen Matrox Mura™ MPX Series video wall controller boards to drive AGCWall Series, a new line of video wall controllers. The fully-integrated systems are currently validated with up to seven Mura MPX boards, which will leverage Matrox’s PCI Express x16 Gen2 boards’ 64 Gbit/sec duplex data transfer for a crisp display of HD input captures. With support of up to four inputs and four outputs on a single-slot board design, the Mura MPX Series enables AGELEC’s solutions to feature up to 28 1080p HD inputs across 28 1080p HD projectors, cubes, or flat-panel displays without sacrificing frame rate, color, or resolution.

"Matrox is pleased that AGELEC has selected the Mura MPX Series to play a critical part in powering its video wall solutions,” said Helgi Sigurdsson, Product Manager, Matrox Graphics Inc. “The Mura boards are the perfect complement to a new product line that will draw on AGELEC’s 45 years of industry expertise to deliver a full range of small-to-large-scale video wall designs.”

The AGELEC AGCWall Series video wall controllers are designed for a diverse AV market that includes firms seeking solutions pertaining to control and board rooms, mission-critical operations, and digital signage. With the ability to easily configure multiple Matrox Mura video wall controller boards within a single system, customers can benefit from high-performance collaborative video walls and wall matrix management with minimal latency.

“AGELEC is looking forward to meeting and exceeding customers’ requirements and expectations by implementing Matrox Mura MPX technology into our video wall controllers,” said Jean-Michel Lanco, CEO, AGELEC. “Our respective traditions of excellence within the industry will undoubtedly prove successful for ourselves and AGELEC’s clients as well.”

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more