EPIA Board Supports Windows Embedded POSReady 7

Steatite has launched the VIA EPIA-M860 Mini-ITX board, which is designed to offer a complete platform for demanding digital signage, media terminals, infotainment devices and online streaming video. Combining a 1.2GHz VIA Nano E-Series processor with the VIA VX900 media system chipset, the VIA EPIA-M860 offers PCI, PCIe and Mini PCIe support, combined with mainstream DDR3 memory and both ATX and DC-in power support.

Designed as a fully featured entry-level VX900 board, it is the first EPIA board that supports Windows Embedded POSReady 7, a flexible operating system designed to connect point of service (POS) solutions with peripherals, servers, services and the cloud. A fanless 1.2GHz VIA Nano E-Series processor is joined by the VIA VX900 media system processor, providing DirectX 9.0 integrated graphics, clear HD audio and Gigabit networking.

The VIA VX900 system supports up to 4GB of DDR3 1,066MHz system memory and offers video acceleration for MPEG-2, VC-1, H.264, WMV9 and Blu-Ray HD video formats. Rear panel I/O includes a GigaLAN port, an HDMI port, a VGA port, four USB 2.0 ports, a serial port connector, a DC-in jack (manufacturing option) and both line-out and mic-in jacks. On-board connectors include a PCIe Gen2 x1 slot, a Mini-PCIe socket, and a PCI slot, two SATA connections, two voltage-selectable RS-232 pin headers (selectable to 5V/12V), two USB pin-headers for three ports, a SMBus header and digital I/O, including GPI and GPO options.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more