KEMET Introduces First-to-Market Multicomponent Capacitors For Low and High Frequency Filtering

KEMET Corporation (NYSE: KEM), a leading manufacturer of tantalum, ceramic, aluminum, film, paper and electrolytic capacitors, today introduced its first-to-market F5D Series metallized polyester (MKT) film capacitors with integrated ceramic capacitors. These multicomponent capacitors eliminate the need for two devices by filtering both low and high frequency noise in automotive motors and other suppression applications.

“These innovative multicomponent capacitors handle both low and high frequency EMI/RFI suppression in just one small device without the need for a printed circuit board,” said Dr. Philip Lessner, KEMET Senior Vice President, Chief Technology Officer and Chief Scientist. “The F5D Series clearly demonstrates KEMET’s continued commitment to technological leadership and serving our customers as The Capacitance Company.”

“The F5D Series combines a self-healing MKT film capacitor, capable of withstanding high voltage peaks for low frequency filtering, and a multilayer ceramic capacitor of low capacitance for high frequency filtering,” said Franz Wurmser, KEMET Research and Development Engineer. “Automotive motor applications such as windshield wipers, cooling fans and seat positioning can all benefit from this single leading-edge KEMET component.”

Technical Information
  •     AEC-Q200 and ISO 7637-2 qualified
  •     RoHS compliant
  •     Non-polar device, minimizing installation concerns
  •     Customized variants available
  •     DC voltage ratings 63V and 100V
  •     Capacitance offerings ranging from 100nF to 2.2ìF for the film capacitor and 10pF to 100nF for the parallel ceramic capacitor
  •     Operating temperature range of -55°C to +125°C
  •     Available capacitance tolerances of ±10% and ±20%
  •     Pitch 5 mm and 10mm

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more