Guide3D Labs to Offer Implant Surgical Guides Printed with Objet New Bio-Compatible Transparent Dental Material

Objet Ltd., the innovation leader in 3D printing for rapid prototyping and additive manufacturing today announced that Guide3D Lab will start offering its dentist customers surgical guides made of the new Objet Bio-Compatible 3D printing material (MED610™). According to Guide3D, the material combines bio-compatibility with high transparency, which makes it an ideal material for the production of highly accurate, customized implant surgical guides.

According to David Kenyan, General Manager of Guide3D Lab, “Using the Objet Bio-Compatible material enables dentists to easily use customized 3D printed surgical guides in the mouth and better monitor the soft tissue underneath to ensure a safer and more successful dental procedure.”

Avi Cohen, Head of Medical Solutions at Objet adds: “Objet Bio-Compatible transparent material is manufactured under the ISO 13485:2003 certification, which guarantees fulfilment of comprehensive quality management procedures for the manufacture of medical devices.”

“The new Objet Bio-Compatible material is ideal for prolonged skin contact of over 30 days and mucosal-membrane contact of up to 24 hours. It has five medical approvals according to the harmonized standard ISO 10993‑1: Cytotoxicity, Genotoxicity, Delayed Type Hypersensitivity, Irritation and USP Plastic Class VI.* MED610 is also manufactured under the ISO 13485:2003 certification, which specifies that each and every batch of the material undergoes bio-compatibility conformity testing, including GC-FID, before it is packaged. This ensures the highest bio-compatible standards for dental solutions requirements” Added Avi Cohen.

MED610 is the second material Objet has created specifically for dental and medical solutions. It joins the company’s original Objet VeroDent material, currently used extensively in the digital dental process at dental labs worldwide.

Comments

Post a Comment

Popular posts from this blog

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more