EMKA Offers Quarter-Turn Locks In Mini Package

EMKA's 1022 programme quarter-turn locks or 'mini-locks' have the same capabilities as the larger versions but in a miniature package. The mini-locks are suitable for small cabinets, wall-mount enclosures, access panels or other housings. They are useful where space and design limitations demand easy operation as well as a good level of rugged serviceability, according to the company.

The 1022 programme locks are also available with additional sealing rings for applications where protection to IP65 is important; for heavy dust environments, a special dust cap can further improve the sealing capability. The mini-locks are quick to fit and feature either a standard 14mm square hole for nut fixing or a 15 x 18mm double-D hole suitable for spring fix lock bodies, thus enabling quick installation in production situations (not to IP65).

In order to cover a range of operational needs, the 1022 programme can be supplied with cylinder locks/inserts to take square or triangular keys or slotted for screwdriver opening. The wing-knob design is often preferred as it enables a greater turning/closure force for improved gasket pull-down and enhanced sealing. EMKA claims that the wing-knob style also offers easier operation, such as for gloved hands.

The lock types are complemented by standard cams, which allow installers to adapt to varying door/frame depths and gasket thicknesses ranging from 7.55mm up to 19.5mm in depth. The company offers the 1022 programme in zinc die with a black powder coat or a chrome finish, as well as in stainless steel or in reinforced polyamide.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more