Wonderware Names Longwatch As Software Partner

Wonderware has named Longwatch, a supplier of video monitoring hardware and software products, as a certified software provider. Wonderware software partner products are endorsed or certified by Wonderware to be applications with proven compatibility with Wonderware software. Certified software partners have access to Wonderware Beta programs, toolkits and senior technical support so they can integrate and extend Wonderware software on an ongoing basis.

The Longwatch video surveillance system has been integrated with Wonderware's Intouch HMI, Active Factory, Historian and MES software in several applications. The combination of Wonderware software and Longwatch video systems allows operators in process control applications to see live and archived video from the plant floor directly on their Wonderware HMI screens. This allows operators to 'see' what is going on in a process plant or factory without having to send someone to the scene. The operator can also 'rewind' the video to see what happened a few seconds or a few hours before an incident.

By integrating with the Wonderware Activefactory trend chart object, Longwatch Video Historian software simultaneously shows trend graphs of user-selected variables (displayed as colour 'pen' lines) with archived video. The video panel and trend chart can be 'linked' (synchronised) with the click of a button on the viewer display. When the user clicks and drags the chart object's time cursor (normally used only for displaying the process variable's engineering units value and status at a selected point in time), the Video Historian also moves the video forward or backward accordingly.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more