Phocheck PID Detects Volatile Organic Compounds

Ion Science has introduced the Phocheck Tiger photoionisation detector (PID) for rapid, accurate detection of volatile organic compounds (VOCs). The instrument's PID technology provides a dynamic detection range of 1ppb to 20,000ppm. Phocheck Tiger is pre programmed with more than 450 response factors. Its software features mean the instrument requires no complicated programming and set-up procedures to perform both basic and advanced functions.

The instrument has a fast response time and is quick to clear down. Phocheck Tiger can be connected directly to a PC via the USB for fast data download capabilities. Wireless data download via a Bluetooth interface is available as an option. The instrument's Fence Electrode Technology has received independent verification for speed and accuracy, effectively minimising contamination effects. The instrument's high performance in high humidity environments is achieved without impairing other features.

Phocheck Tiger has been designed for the safe replacement of batteries in hazardous environments. Long-life rechargeable Li-ion batteries give up to 30 hours of use. Fast battery charging allows the instrument to be fully charged in 6.5 hours, while eight hours of use can be achieved from 1.5 hours charge. The six-pin miniPID detector cell with anti-contamination design extends run time in the field. Low-cost filters and lamps can be changed in seconds, minimising downtime.

Inexpensive disposable parts mean Phocheck Tiger has low running costs. The detector can be upgraded with a range of functions to choose from. A base unit can be upgraded with data logging, health and safety and ppb options, remotely, without needing to be returned to the factory. Phocheck Tiger has a rugged design and its protective, removable rubber boot withstands harsh environments. The large, clear back-lit display allows for easy viewing in any light condition. An integrated torch is designed for directing the instrument's probe into dimly lit areas.

The device offers simple keypad operation with an icon-driven menu. The illuminated software keys are large enough to be operated even when wearing thick gloves. The instrument has two 95dBA audible alarms, two bright flashing LEDs and a vibration alarm. Each function can be selected, switched off or turned down as required. IECEx, UL and CSA approved, Phocheck Tiger is globally certified as intrinsically safe for use in hazardous areas.

Designed to IP65, the instrument provides optimal resistance to moisture, dust and contamination. Target industries and applications for Phocheck Tiger include industrial safety, environmental, petrochemical, chemical, indoor air quality and hazardous materials. Phocheck Tiger is available from Ion Science or through its global network of distributors and comes with a five-year warranty as standard.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more