Stemmer Offers Falcon's HG Series Of Cameras

Stemmer Imaging is now offering Dalsa's new Falcon VGA300 HG, 1M120 HG and 1.4M100 HG cameras. These high-speed cameras feature high-quality Dalsa global shutter CMOS image sensors for applications where the imaging of fast-moving objects without smear or distortion is required. This includes electronics manufacturing, semiconductor inspection and industrial metrology (gauging).

The Falcon HG camera series meets the needs of the machine vision industry by providing good sensitivity and fast frame rates. The VGA300 HG is a monochrome camera delivering 300fps, while the 1M120 HG offers 1-megapixel resolution with 120fps and the 1.4M100 HG delivers 1.4-megapixel resolution with 100fps.

In addition to the HG models optimised for high sensitivity, Dalsa also offers the Falcon 1.4M100 XDR, a 1.4-megapixel camera delivering 100fps and optimised for a high dynamic range. The new Falcon cameras feature CMOS technology for a lower power consumption and support Power over Camera Link (PoCL), removing the need for a separate power cable and reducing the system cost and cabling complexity.

The cameras are fully programmable and incorporate exposure control, gain and offset adjustment and flat-field correction to optimise system performance. Falcon cameras are supplied in compact 44 x 44 x 44mm housings with mounting options.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more