Variohm Eurosensor Offers BEI Incremental Encoder

The Omnicoder, developed by BEI and available in the UK from Variohm Eurosensor, is a industrial incremental encoder that offers the flexibility of user-programmable resolution. Based on BEI's H25 series - a durable encoder with a die-cast aluminium housing, a 416 stainless-steel shaft and heavy-duty ABEC 7 bearings - the Omnicoder is connected to a PC using a special USB cable assembly and through a free-of-charge user interface.

The encoder resolution can be programmed between one and 10,000 counts per revolution. The patented control algorithm developed for the Omnicoder ensures that the duty cycle and phase relationship are unaffected at the maximum resolution. The design also ensures that the resolution information is stored redundantly in non-volatile memory, making it as reliable as a fixed disc encoder.

Aimed at original equipment manufacturers, machine builders and integrators who need the flexibility to set encoder resolution in situ or who are wanting to reduce the stock inventory associated with using several different fixed-resolution encoders, the Omnicoder can also be of benefit in labelling and packaging registration applications where it is desirable to modify the encoder resolution on product changeover. Variohm Eurosensor provides sales and application support for BEI's complete range of linear and rotary encoders, electronics and displays.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more