Axiomtek Launches Digital Signage Platform

Axiomtek has released the DSA-146, its large-size advertising digital signage platform with 46-in full HD wide TFT LCD. The DSA-146 is designed to be installed in any public or commercial space to effectively convey digital content such as commercial, announcement, news and information, operating 24/7 as a non-stop service. The platform combines low-power Intel Celeron M 575 2.0 GHz or high-performance Intel Core2 Duo T9400 2.53GHz processor with Intel GM45 chipset to deliver good computing power and enhance graphic capability. Its pluggable module architecture design is said to ease system configuration and maintenance. The DSA-146 is said to be ideal for a range of applications, including: shopping malls, corporate, education, hospitality, religious organisations, banks, transportation, retail stores, restaurants, theatres and more. For the DSA-146, Axiomtek has introduced pluggable module architecture design to advance system reliability and scalability. Users can slot-in and out the pluggable module, therefore maintenance and upgrading CPU, DRAM and HDD is said to be easier and faster than before. For system stability, this fanless unit can self-diagnose LCD life and detect external temperature. The function of the LCD video alive detection can determine if communication between the LCD and system board is working normally. The built-in sensor is able to detect outdoor sunlight in order to adjust LCD colour/backlight automatically. For green power concern, the optional motion detection sensor can switch LCD off or on based on human foot traffic. Furthermore, the DSA-146 adopts 46-in wide TFT LCD with full high-definition 1,920 x 1,080 pixels, which generates high-quality images. An optional touch screen is also available. For storage capacity, the digital signage unit is outfitted with built-in 1GB DDR3 DRAM plus 80GB SATA HDD. More features include VGA or DVI out, four USB 2.0 and audio (4W x 2 built-in side facing speaker).

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more