Nilfisk Scrubber Dryers Have ECA WTL Approval

Nilfisk has claimed that it has the greatest amount of water-efficient scrubber driers approved on the Enhanced Capital Allowance (ECA) scheme's Water Technology List (WTL). A total of 49 Nilfisk models are now certified and listed on the ECA WTL. Models range from the 450mm BA451 through to the 860mm ride-on scrubber dryer the BR855.

Models are approved with the benefit of the automated chemical dosing system EDS - Eco Dosage Solution. The government is encouraging the use of green technology by setting up tax incentive schemes for companies that purchase qualifying equipment. The initiative encourages the use of environmentally friendly cleaning machines, and in particular water-efficient scrubber dryers.

Nilfisk has been working with ICCMA and Defra to define the scheme. The ECA scheme allows businesses to claim the whole cost of the qualifying equipment against corporation tax in the first year.

For larger companies, this allows them to save 28 per cent in the form of a tax allowance. Qualifying machines are listed, by model, on the WTL and the manufacturers entitled to use the WTL logo where appropriate. All companies, irrespective of size or industry segment, can claim. Claims can only be made on investments in new and unused plant and machinery.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more