GE Introduces IGS Drivers For Proficy Software

GE Intelligent Platforms has announced the availability of Industrial Gateway Server (IGS) 7.5 drivers for its Proficy software. This offering, utilising industry-standard Kepware KEPServerEX and driver technology, includes more than 100 protocols, which enables connectivity to thousands of different control hardware and instruments. Several of the connectivity solutions support vertical industry-specific hardware.

A single IGS 7.5 instance allows customers to connect to a variety of devices, IGS 7.5 provides users with an opportunity to consolidate information from different control hardware and instruments to visualise, control, analyse and optimise via connected Proficy HMI/Scada, MES, EMI or Workflow software. It is optimised to use the maximum possible speed supported by the devices with built-in diagnostics for communication errors and complete browsing functionality into devices.

This connectivity solution allows customers to manage operations from a more complete perspective, allowing them to process various data points and correlate multiple process indicators. IGS 7.5 provides robust connectivity through the latest OPC DA standards and also comes with a native Proficy Ifix interface that takes speed and reliability further. It goes beyond Proficy Ifix HMI/Scada solutions and can be used with the entire Proficy software portfolio, such as Proficy Cimplicity, Workflow, Plant Applications and Historian.

The native interface into the Proficy Ifix software is another feature of this driver. The enhanced IGS 7.5 application supports remote and offline configuration options without disrupting communications. Existing customers can upgrade to the enhanced IGS 7.5 and access all the latest added device connectivity options quickly. GE's ongoing work with Kepware keeps the product in tune with technology changes and connections to newer devices.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more