Whitelegg To Show Monitoring Solutions At Maintec

Whitelegg Machines has announced that it will exhibit at the upcoming Maintec 2010 event. The company has also invited Tim Thomas, senior engineer of Baker Instrument Company, to join it at the event. On Stand F6, Thomas will be giving a learn-shop presentation on aspects of motor condition monitoring. As well as showing a range of instruments for the online and offline testing and monitoring of electric motors, Whitelegg will be launching NetEP: its online motor monitoring network-based system.

This is an automated system for the monitoring of electrical rotating equipment. The instrument will monitor 40+ parameters on up to 32 motors and on up to seven voltage buses. Benefits to the user include the automated evaluation of critical assets from the convenience of the office or anywhere an internet connection is available. With the ability to monitor multiple motors simultaneously, this instrument will supply important data along with saving time in comparison with route-based instrumentation, according to the company.

NetEP will notify the user of alarm situations, maintain all database functionality and trend all data for enhanced analysis. Tests include power quality, rotor bar integrity, torque ripple and the transient analysis of motor start-ups. Whitelegg Machines is the UK and Ireland sales and support agent for US-based Baker Instrument Company.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more