Skip to main content

RF1 Series Compact Solid State Relays

CARLO GAVAZZI is proud to announce the launch of our new RF1 Series Compact Solid State Relay. The RF1 Series provides compact solid state switching suited for applications with confined space. Long lifetime is ensured by CARLO GAVAZZI’s new assembly technology that significantly reduces stresses of the power semiconductor.

The RF1 Series is ideally suited for applications where trouble free operation is required for a large number of cycles and where space is limited. The RF1 Series occupies only 30% of the panel space typically required for a standard panel mounted (hockey puck) SSR, it’s merely 36 x 21 x 24mm (H x W x D).

The RF1 Series is designed for control of resistive loads. The zero switching type (RF1A), switches ON when the voltage crosses the AC sine wave’s zero crossover point. The instant-ON type (RF1B), switches on at the instant when control voltage is applied.

Integrated transils provide protection against over-voltage. A green LED indicates the presence of control voltage. Fast-on terminals for the input and output voltage enable fast and secure installation. The RF1 Series is provided with a convenient pre-attached thermal pad, making it ready for mounting on a panel or heat sink.

Technical specifications include:
  •     Up to 280VAC line voltage
  •     5, 12 or 24VDC control voltage
  •     Up to 25A load current
  •     Zero crossing or Instant-on switching
  •     Transils for over-voltage protection
  •     LED status indication
  •     CE mark, cRUus, CSA and VDE approvals
  •     UL508 100K cycles endurance rating

Comments

Popular posts from this blog

Banner Engineering DF-G3 Discrete Fiber Amplifier Features World-Class Long Range Sensing Capability

Banner Engineering introduces its DF-G3 discrete long-range fiber amplifier with dual digital displays for use with plastic and glass fiber optic assemblies. Featuring increased sensing power, the DF-G3 can sense more than 3 meters (10 ft.) with opposed mode fibers or more than 1 meter (3 ft.) with diffuse mode fibers. The extra power provides increased detection reliability for dark targets at long range and enhanced detection sensitivity when using specialty fiber assemblies for large area and small part detection applications.

The DF-G3 is available with a single discrete output or two dual discrete outputs. The dual discrete outputs can be independently taught to trigger at different intensity values, which is ideal for correct part-in-place or error-proofing, bottle down, and edge guiding applications.

“We developed the DF-G3 fiber amplifier to meet our customers’ need to precisely detect smaller targets at longer ranges” said Dennis Smith, Senior Marketing Manager, Banner Engin…

TURCK M8 CORDSETS WITH 100 PERCENT SHIELDING OPTION PROTECT AGAINST EMI/RFI

TURCK is now offering the option to completely shield M8 picofast ® cordsets by connecting a braided shield directly to the coupling nut. This provides a cost-effective and reliable connection with 100 percent cable and connector shielding, which protects against electromagnetic and radio frequency interference.

The 3 and 4-pin cordsets are available with flexlife ® PVC or PUR jacketed cable. All connectors deliver IEC IP 67 protection.

The M8 picofast line, like most TURCK cordsets, provides male or female, straight and right angle connectors, standard and custom lengths, and pigtails or extensions. Fully encapsulated mating receptacles are also offered, completing the system.

TURCK’s BL Compact Family Collects Analog and Digital Signals at the Source

TURCK’s BL Compact system is a revolutionary modular I/O solution for collecting a variety of signals in a single, rugged node on a network. Rather than routing all signals through a control cabinet, this device makes it possible to obtain analog, digital, thermocouple, RTD, serial, RFID or a mixture of signal types in a compact, machine-mountable device over DeviceNet™, CANopen and PROFIBUS ®.

Up to two signals types can be combined in any combination in the BL Compact system, including RFID and analog, digital and serial—and more. The BL Compact system may be customized to suit a user’s specific needs, so that devices may be added to an existing network and signals may be gathered on the machine without an enclosure. This drop-in solution can be used to connect up to 16 devices—drastically reducing the time it takes to run wires for each device back to the control cabinet and the potential for wiring errors.

The BL Compact system is currently available with four, eight or 16 ports i…