NEW STRIPPIT P-1525 CNC TURRET PUNCH PRESS EFFICIENTLY HANDLES LARGE/OVERSIZED WORKPIECES

LVD Company n.v. introduces the Strippit P-1525, a 200kN cost-effective CNC turret punch press designed to efficiently handle large or oversized workpieces up to 1524 x 2500 mm. Larger sheets can be processed with clamp repositioning.

Part of the Strippit P-Series of punch presses, the P-1525 is ideal for the processing of large panels in cellular manufacturing or job shop environments.

LVD’s latest turret punch press delivers up to 270 hits per minute on 25,4 mm centers, and up to 600 hits per minute in nibble mode. The machine provides a ± 0,1 mm finished part accuracy and ± 0,05 mm finished part repeatability. It processes material thicknesses up to 3,5 mm mild steel and up to 6,35 mm aluminum.

ADVANCED HYDRAULIC RAM TECHNOLOGY
A servo-driven hydraulic ram offers control of the ram position to achieve the highest punching rates of any machine in its class. Parameters are easily accessed and changed to provide optimal forming characteristics.

The advanced hydraulic drive system reduces noise and shock to increase machine longevity and reduce tool wear.

A direct drive axes configuration provides the industry’s tightest tolerances. This design better controls both part tolerance and repeatability to eliminate backlash and wear for repeatable accuracy and reliability.

TURRET FEATURES THREE 50,8 MM AUTO-INDEX STATIONS
The Strippit P-1525 features a 21-station thick-style turret with all turret stations keyed for maximum tool load flexibility. This versatile turret design allows every station to accept shaped or round punches and dies, reducing set-up time.

The machine is standard with three 50,8 mm auto-index stations. Each station accepts tools up to 50,8 mm in diameter, including wheel-style or scribing tools.

A full 25 mm feed clearance between the upper and lower turret allows for the production of higher forms such as lances, louvers, embossments or card guides.

The Strippit P-1525 turret is equipped with replaceable hardened steel guide bushings for accurate punch and die alignment, eliminating the need to rebore the turret. Hardened outboard shot pins provide precise alignment of punch and die for exceptional hole quality.

A large tool door allows easy access to the turret for tool loading. Quick-change die holders further reduce set-up time.

The machine’s rigid frame and precise tool guiding system ensure punch and die alignment to provide long tool life and consistently high quality parts.

RELIABLE PC-BASED CONTROL
A state-of-the-art, PC-based Fanuc control is easy to use and proven reliable.

The CNC control provides powerful features such as diagnostics, offers large program storage capacity and networking capability with user friendly MMI (man-machine-interface).

The control delivers powerful features such as full color graphics, advanced “real-time” diagnostics, increased program storage capacity and is network ready for easy transfer of programs from other computers.

Optional CADMAN® programming software provides automatic unfolding of 3D SAT and IGES files, auto-nesting full support for all standard and advanced punching functions, including auto-index stations, multi-tools, standard and special punches, forming, embossing, tapping, stamping and wheel-style tools.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more