KM-Flow - Efficient Packaging with MFC Technology

KM-Flow is the new WITT gas mixer with digital mass flow controllers (MFC) for packaging using a protective atmosphere in the food industry (Modified Atmosphere Packaging = MAP). Combined with permanent gas analysis, you receive online quality control for optimum packaging quality and reduce your gas consumption by up to 30%.

Depending on the model, the KM-Flow mixes two or three gases. The digital mass flow controllers (MFC) meter the selected gas mixture with highest precision and reliability.

A highly efficient packaging workflow can be realised with the innovative KM-Flow with MFC technology. In combination with an analysis instrument that continually measures the gas concentration in the packaging during the packing process, the KM-Flow can adjust the gas ratio and gas mixture flow rate to optimize the process. The result: maximization of the packaging quality along with a minimization of the gas consumption. Thus, the WITT gas mixing system helps to reduce costs and at the same time minimizes the uncontrolled escape of CO2 protecting employees.

The KM-Flow is easily operated by touch screen. Freely programmable gas mixtures can now be selected at the touch of a button or by barcode reader. Another advantage of the MFC technology: At all times the user has full overview of the exact mixing ratio, the flow rate of the mixed gas as well as the gas consumption. The digital data-bus also makes evaluation and documentation of the measuring data easier. You comfortably receive full transparency for your packaging process.

The KM-Flow offers highest flexibility. Naturally, the gas mixing system is suitable for all types of packaging machines. Thanks to the MFC technology, it is easy to configure and suit your individual needs.

WITT has a lot of experience with using mass flow controllers. For example, this technology has been used for supplying burners in the glass industry for many years. Of course, the KM-Flow gas mixing systems are certified according to ISO 22000 for food safety and the EG-Directive 1935/2004. Besides the food industry, the KM-Flow with MFCs can also be used in further applications.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more