ESAB Launches Latest Welding Supplies In Dublin

ESAB has introduced a welding unit that runs off single-phase power or portable generators, two lightweight plasma cutters, a trio of high-performance welding machines and a range of head-shields. The two new portable welding machines, the Caddy Mig C160i and C200i, were launched in Europe in June and are now available through ESAB's distributor network in Ireland. These lightweight (11.4kg), rugged machines are suitable for small-scale assembly and repair operations, either in the workshop or the field.

The polarity of the machines can be changed to allow operators to use either solid or gasless cored wires while having a choice of power supply - single-phase power or portable generator - means they can be used almost anywhere. The user simply selects the plate thickness and the machine automatically sets the right voltage. Mark Copley, country manager for ESAB Group (Ireland), said that the Caddy Mig appealed to a whole new class of user who preferred to do simple welding jobs themselves rather than buy in professional services.

Copley added that ESAB would also be bringing out several new heavy-duty welding machines in early 2011, in the form of the new-generation Aristo 300, 400 and 500, a trio of welding units designed for more demanding industrial welding operations. In terms of cutting equipment, ESAB showcased two new models in its Powercut line of manual-cutting machines. The Powercut 900 slices through metal up to 0.9in thick while the 1600 can work on metals up to 1.6in thick. Features include a lightweight steel casing, external torch wrap, digital display and rapid torch exchange.

The machines also represent a significant step up in performance, according to Steve Purnell, UK and Ireland marketing manager, ARC equipment. The product showcase also provided an opportunity to view ESAB's latest range of New Tech ADC Plus protective head-shields (welding masks). The head-shields have a yellow and black design and incorporate ADC (angular dependence compensation) technology that gives the welder a bigger viewing area while reducing the level of bright visible light.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more