SICK Introduces Compact Code Scanners

A new range of code scanners from SICK is designed to provide reliable 1D, stacked and 2D code identification, traceability and anti-counterfeiting in a compact housing. 'The Lector620 sets a new standard in barcode and direct part marking [DPM] scanner design,' said Tim Stokes, the company's barcode product manager. SICK has developed four versions of the new scanner to meet all market demands.

The Eco is the foundation model, while the Standard device is deployed for the rapid implementation of universal applications. The High Speed model has been developed for activities such as packaging and document handling, and finally the DPM can be used for directly applied markings. The Lector is said to be straightforward to use, with parameterisation achieved at the push of a button, while the laser-based alignment assistance reduces training and installation time. The LED illumination also ensures quick analysis of the read-rate performance.

Using decoding algorithms, the new Lector series offers the real-time, reliable decoding of all images captured with a frequency of 60Hz, improving read rates and throughput, as well as the timely detection and elimination of read problems. The Lector620 combines a compact size with a significant field of view, covering 43 x 67mm, a depth of field of 50mm and a 100mm reading distance. A range of IT integration opportunities is available, including serial, Ethernet, Profinet, Profibus and CAN. Commissioning can be carried out without a PC via auto setup.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more