Eriks Launches Bio-Hygienic Seal Compound

Eriks has launched a bio-hygienic seal compound, which is said to represent a significant breakthrough in anti-microbial rubber technology. Not only does the new compound inhibit the growth of micro-organisms, it also deters them from contaminating or colonising its surface. Eriks 'bio-hygienic' is a proactive antimicrobial rubber compound that provides residual protection against microbial contamination augmenting decontamination procedures in locations that are poorly served by CIP/SIP procedures.

The antimicrobial agent - a zirconium phosphate-based ceramic, ion-exchange resin, containing silver - forms an integral part of the rubber compound, not simply a skin or liner. This means the antimicrobial properties always remain active and any abrasion or wear to the surface of the rubber actually increases the exposure of the antimicrobial agent and with it the efficacy of its antimicrobial qualities. The result is a material that is not just inherently hygienic, but that also eliminates foul odours caused by bacterial buildup, plus discolouration and the formation of mildew and slime. Bio-hygienic's technology can be incorporated into a range of compounds to meet various sealing requirements, and can be fabricated into standard and bespoke O-rings, extruded profiles, sheets and mouldings in HNBR-70, EPDM-70, Silicon-70.

Its antimicrobial agent is acknowledged to be safe for human contact and is recognised for its effectiveness against a range of micro-organisms. Unlike most organic biocides, bio-hygienic can be used in human- and food-contact situations, and is just as effective in the pharmaceutical and medical industries, water treatment, beverage production and dispensing, with FDA compliant grades also being available. DIN11851 coupling seals for the dairy industry are also available.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more