Skip to main content

MR-J3 Servo Amplifier's Hallmark Performance Benefits Now Available Over EtherCAT

If you need TCO reducing, best-in-industry servo performance with an EtherCAT Master controller over CoE, the MR-J3 servo amplifier series now offers the 'MR-J3-A-RJ158' with 'MR-J3-T04' servo solution. This solves the need to achieve high performance and accurate control in combination with the high precision MR-J3 series servo motors, all over an EtherCAT network.

The MR-J3-xxA-RJ158, offered as part of the MR-J3 family, is an AC servo drive designed to provide users with connectivity to Mitsubishi Electric high-performance servo amplifiers over EtherCAT communication. It connects with the MR-J3-T04 unit that is part of the required construct for the EtherCAT solution, and also houses the EtherCAT interface RJ45 connectors. With this solution, Mitsubishi Electric offers connectivity to EtherCAT master controllers over CANopen or CoE protocols along with the CiA402 drive profile application communication. The drive can run control modes including position, speed and home position. The new line is designed for packaging, material handling, textile, machine tooling, printing and automotive applications, and leverages Mitsubishi Electric's best-in-class servo amplifier performance. Enterprises that require the open EtherCAT network can now connect with the MR-J3 series' machine analyzer and simulation, advanced gain search, vibration suppression control and auto tuning functions, among others. Mitsubishi Electric will offer the EtherCAT amplifier with a capacity ranging from 100W to 22kW. These amplifiers will be able to drive the MR-J3 servomotors, which are equipped with built-in absolute high precision 18bit (262,144 pls/rev) standard. In addition to being compact and offering superb controllability, certain models also allow for up to 350 percent torque overload during acceleration and deceleration periods.

Comments

Popular posts from this blog

Banner Engineering DF-G3 Discrete Fiber Amplifier Features World-Class Long Range Sensing Capability

Banner Engineering introduces its DF-G3 discrete long-range fiber amplifier with dual digital displays for use with plastic and glass fiber optic assemblies. Featuring increased sensing power, the DF-G3 can sense more than 3 meters (10 ft.) with opposed mode fibers or more than 1 meter (3 ft.) with diffuse mode fibers. The extra power provides increased detection reliability for dark targets at long range and enhanced detection sensitivity when using specialty fiber assemblies for large area and small part detection applications.

The DF-G3 is available with a single discrete output or two dual discrete outputs. The dual discrete outputs can be independently taught to trigger at different intensity values, which is ideal for correct part-in-place or error-proofing, bottle down, and edge guiding applications.

“We developed the DF-G3 fiber amplifier to meet our customers’ need to precisely detect smaller targets at longer ranges” said Dennis Smith, Senior Marketing Manager, Banner Engin…

TURCK M8 CORDSETS WITH 100 PERCENT SHIELDING OPTION PROTECT AGAINST EMI/RFI

TURCK is now offering the option to completely shield M8 picofast ® cordsets by connecting a braided shield directly to the coupling nut. This provides a cost-effective and reliable connection with 100 percent cable and connector shielding, which protects against electromagnetic and radio frequency interference.

The 3 and 4-pin cordsets are available with flexlife ® PVC or PUR jacketed cable. All connectors deliver IEC IP 67 protection.

The M8 picofast line, like most TURCK cordsets, provides male or female, straight and right angle connectors, standard and custom lengths, and pigtails or extensions. Fully encapsulated mating receptacles are also offered, completing the system.

TURCK’s BL Compact Family Collects Analog and Digital Signals at the Source

TURCK’s BL Compact system is a revolutionary modular I/O solution for collecting a variety of signals in a single, rugged node on a network. Rather than routing all signals through a control cabinet, this device makes it possible to obtain analog, digital, thermocouple, RTD, serial, RFID or a mixture of signal types in a compact, machine-mountable device over DeviceNet™, CANopen and PROFIBUS ®.

Up to two signals types can be combined in any combination in the BL Compact system, including RFID and analog, digital and serial—and more. The BL Compact system may be customized to suit a user’s specific needs, so that devices may be added to an existing network and signals may be gathered on the machine without an enclosure. This drop-in solution can be used to connect up to 16 devices—drastically reducing the time it takes to run wires for each device back to the control cabinet and the potential for wiring errors.

The BL Compact system is currently available with four, eight or 16 ports i…