Electrolube to Show Eco-Friendly Cleaning Products

Electrolube, a manufacturer of electro-chemicals, will present environmentally friendly cleaning products at the International Electrical, Energy and Automation Industry Trade Fair (FIEE). The company, which will be found on Stand G76, will exhibit conformal coatings, resins and thermal management solutions, which are being supplied across the region in bulk packs for large-scale use. Electrolube's Safewash range of water-based cleaners is currently in use in a variety of cleaning machines.

It is claimed to provide excellent cleaning performance, meeting military and commercial standards, at minimal financial and environmental cost. The products are non-flammable and 100 per cent ozone-friendly biodegradable solvent blends designed to clean and remove leaded, lead-free and no-clean flux residues from printed circuit boards. The blends also remove solder pastes and adhesives from screens, stencils and related accessories. The newest edition to the Safewash range is Safewash Total, an effective aqueous cleaning product.

The product is a specially formulated blend of non-flammable solvents, which form a micro-emulsion when mixed with water. The cleaner is suitable for the removal of pastes and adhesives from screens, stencils, boards and accessories as well as general degreasing applications, and can be used in dishwasher and inline pressure systems, along with ultrasonic and spray-under-immersion applications.

The Safewash range has performed well under extreme testing by many equipment manufacturers, reaching the high levels required by the military in ultrasonic, spray-under-immersion, dishwasher and jig cleaning equipment, according to Electrolube. SWAS, also from the range, has been shown to provide excellent cleaning performance to military and commercial standards, with little financial and environmental cost.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more