Werum To Implement MES At Dr Reddy's Facility

Dr Reddy's Laboratories has chosen to implement PAS-X, a manufacturing execution system (MES) from Werum Software and Systems, at its site in Bachupally, Hyderabad. Dr Reddy's Laboratories plans to optimise the efficiency, quality, compliance and performance of its production processes with PAS-X. The company has chosen to first roll out PAS-X at one of its main production facilities in Bachupally. This MES project is part of an expansion that also involves the construction of a warehouse and a weighing and dispensing area.

After the creation of the functional specification, Werum will be implementing PAS-X in two phases. In the first, the MES will support warehouse and weighing and dispensing processes. PAS-X will execute the whole process for receiving goods, including the required sampling operations. All materials will be dispensed in the new weighing and dispensing area and will then be delivered for the manufacturing process. PAS-X will receive manufacturing order information from the enterprise resource planning (ERP) system (SAP) via an automated interface and will support not only the entire weighing process but also equipment and container management and material tracking from the weighing area to the manufacturing stations.

During the second phase, Werum will add full-scope MES functionalities to the paperless system, from master batch records management to complete electronic batch recording. Production in Hyderabad will cover all pharmaceutical manufacturing processes, including weighing, blending, granulation, compression, coating and packaging. The project will be carried out by Werum's Asia Support Centre, which is located in Singapore.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more