Hach Lange To Unveil Water Monitoring Technologies

Hach Lange will demonstrate a range of technologies for monitoring raw water, process water and wastewater at the upcoming Water, Wastewater and Environmental Monitoring (WWEM) event. According to the company, which will be found on stands 93 and 94, experts will be available to discuss the efficiency and cost savings that can be achieved with the new wastewater treatment optimisation system (WTOS). Information on the new Hach Biotector total organic compound (TOC) analysers will also be available on the stands.

These instruments are said to provide maximum uptime and reliability thanks to a patented self-cleaning oxidation technology that handles difficult samples and reduces maintenance. Unlike traditional TOC analysers, the Biotector eliminates the build-up of salts, particulates, fats, oils and greases that can lead to drift and high maintenance. Visitors from manufacturing and processing industries will be able to see the new Orbisphere 3100 portable DO analyser that employs optical technology to deliver high levels of accuracy and reliability with a substantially reduced requirement for maintenance and calibration.

WWEM 2010 visitors involved in laboratory or field testing will have the opportunity to handle the latest versions of the company's range of electrochemistry instruments. These include the digital handheld intelligent HQD meters, the new H-Series meters with rugged probe options, the probeless MP meters and the Sension+ field and bench-top analysis kits. The company will run two workshops during WWEM. The first is entitled 'Water Treatment Optimisation Solutions - Saving operational expenditures and optimising plant processes' and the second is called ' Biotector - a different approach to online TOC analysis'.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more