Smart Camera Allows Robotic Handler Positioning

Dalsa's BOA M1280 smart camera offers scalable vision solutions to satisfy a range of applications, from the positioning of robotic handlers to complete assembly verifications. Available from Stemmer Imaging in monochrome and colour versions, the camera has a resolution of 1,280 x 960 pixels - four times the resolution of the entry-level M640 model. All BOA cameras feature a full suite of vision tools, a web-browser-based user interface and an application-development interface, as well as inputs and outputs, illumination control and factory communications.

The BOA series comprises a robust, fully integrated intelligent vision system designed for harsh-environment factory-floor deployment. The IP67-rated housing measures 44 x 44 x 44mm and is suitable for washdown environments without a protective enclosure if a specified lens tube is used. A new lens cover is available in two lengths to suit the majority of common lenses.

The camera base plate has also been adapted to provide mounting holes on all sides for maximum installation flexibility. Dalsa's integrated Inspect Express software makes the installation of additional software and complex programming unnecessary, as a simple, flexible application setup can be performed using any standard browser. Multiple on-board processing engines optimise system performance with algorithm optimisation via the DSP, application management via the CPU and sensor management via the FPGA.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more