Secomak Gas Boosters Come With Two-Year Guarantee

Secomak is offering a two-year guarantee with all new Gas Boosters purchased. Secomak Gas Boosters are built to a high standard and are said to offer excellent safety and reliability levels. Used worldwide in the building and construction industry, Gas Boosters raise the pressure of gas supplies and provide sufficient gas pressure to operate burners effectively and efficiently. Irrespective of their physical size, Secomak Gas Boosters are said to offer high performance, provide reduced noise levels, occupy less space and have a low power consumption compared to comparable direct-drive boosters.

Gas Booster Packages are supplied with the required pressure switches and controls to achieve trouble-free installation. These include start/stop facilities from either the Gas Booster or a separate management panel, overload protection and pressure switches for the inlet and outlet of the Gas Booster. For safety reasons, Secomak manufactures Gas Boosters to the British Standard BS 8487:2007 as per IGEM/UP/2 Edition 2 Communication 1729.

Secomak Gas Boosters provide flexibility in performance and require minimal maintenance. Secomak Gas Booster experts ensure that customers can find a product that matches their requirements as well as provide after-sales support. Through developing an extensive range of Gas Boosters Secomak aims to ensure that all types of customers are catered for. The company said that its Gas Boosters have provided more than 40 years of incident-free industrial operations.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more