Package Helps IT Managers To Improve Efficiency

Rittal's Rizone management software combined with Microsoft's System Center Operations Manager (SCOM) can help data centres to achieve energy savings and improve business efficiency. The Rizone software monitors and controls the cooling from chillers, computer-room air-conditioning (CRAC) systems, liquid-cooling packages and free cooling, power supplies (UPS and power distribution and so on), energy consumption and other physical parameters such as the temperature, access or security of a data centre.

The Microsoft SCOM monitors the performance of the server and also provides an event display and event evaluations. Rittal and Microsoft have created a management pack to facilitate the sharing of data between IT infrastructure and servers. Together, this commercial software extends beyond the infrastructure components and allows the power consumption monitoring of all devices to enable energy savings to be achieved. If demand within the application layer is higher, the software interacts with the physical layer to provide more power or more cooling.

Conversely, if IT demand is low, the physical layer can effectively hibernate, which can significantly reduce valuable power consumption. An added benefit is that a holistic view of the overall network infrastructure is provided via the SCOM graphical user interface. Integrating systems can improve long-term efficiency and energy savings. Rizone, in conjunction with SCOM, gives IT managers the tools to significantly drive down the per-usage effectiveness of their data centres.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more