Manual Cutting Packages Suit Harsh Environments

ESAB has introduced two models to its Powercut line of manual cutting packages, in which the power source is contained within a durable damage-, corrosion- and weather-resistant external housing. The lightweight, portable Powercut 900 and 1600 packages are designed to make cutting easier and more economical through simplified operation, reduced set-up time and enhanced consumable life. According to ESAB, the Powercut models offer the highest speeds and thickness capabilities in their class, as well as high duty cycles, for high productivity and performance.

Through a combination of long parts life, high speeds and simple torch design, they are said to give the lowest cost per metre of cut of any machine in their price class. The sensitive internal electronics are suspended from the aluminium frame and insulated from shock and vibration. Silicone-sealed switches are also immune to corrosion and dust/dirt infiltration. A quick-disconnect torch disconnects from the machine simply, allowing easy dismantling for storage, repairs or replacement by a mechanised torch.

A digital readout shows the exact pressure or amperage, as well as help codes to assist in troubleshooting and reduce downtime. Blow-back technology eliminates high-frequency start-ups that can disrupt CNC controls and nearby computer systems. An automatic function senses which cutting mode is in operation - normal cutting, gouging and grate cutting - and adapts machine operation accordingly.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more