Detect Switch Ideal For Computer Applications

CandK Components is offering its micro-miniature, snap-acting detect switch in four surface-mount options that are said to be ideal for use in telecom, medical, consumer and other applications. Designated the MDS series, the detect switch is available in vertical and right-angle PCB mount and through-hole versions, which now include surface-mount options of left with pins, left with no pins, right with pins and right with no pins.

It is ideal for use in applications where detecting the presence of a mechanical device is required, and, according to CandK, is a good fit for datacom, computer and telecom applications. With these four new options, the series is available in more than a dozen termination styles that allow them to be designed into an array of end products. The MDS with the surface bracket ensures a robust right-angle engagement with handle mechanisms or enclosures.

CandK offers designers the ability to have an SMT surface plate or an SMT surface plate with alignment posts, opening from the right or left. The small-package MDS series is RoHS compliant and provides a 200mohms contact resistance. The snap-acting, tactile feel switches offer a long total travel of 2.9mm and a contact rating of 0.3A at 6VDC. The mechanical and electrical life is 10,000 operations while copper alloy and silver plating ensure durability with an operating force of 65g and an operating temperature of -25C to +70C.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more