Air Conditioners Supply Indoor And Outdoor Cooling

The Spectracool range of industrial air conditioners from Schroff has been designed to provide efficient cooling of electronic systems in a variety of indoor and outdoor applications. Manufactured by McLean Cooling Technology, the air conditioner employs a rotary compressor to achieve an energy efficiency said to be up to 50 per cent higher than conventional designs. In addition, Spectracool is RoHS compliant and uses environmentally friendly R134a refrigerant.

There are 12 standard models in the range, offering a choice of indoor or outdoor designs, with 115, 230 or 415 three-phase AC voltage ratings and nominal cooling capacities of 2,300 or 3,500W. Indoor models include an electric heater strip for active condensate management and a power-off relay for the door switch, while the outdoor models feature corrosion-resistant components, head-pressure control and built-in heaters. All models use cleanable, reusable aluminium mesh filters for maximum cooling performance.

Spectracool's galvanised sheet-metal construction enables it to withstand both rugged factory and outdoor environments, and its RAL 7035 light grey powder-coat painted finish matches that of Schroff's range of 19in equipment cabinets. For applications where stainless-steel enclosures are required, a Type 4X option is also available. Every Spectracool air-conditioning unit is functionally tested prior to shipping and is supplied with mounting hardware, gaskets and a user manual.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more