Tool Designs Schematics For Enclosure Manufacture

Eplan Electric P8 software can assist with the design of schematics for enclosure manufacturing. Complete parts data, such as enclosures and devices, can be selected rapidly from the Eplan Data Portal, or via product configurators. The system automatically generates corresponding device, terminal and wiring lists, providing information about components, connection points or wiring cross-sections. This electrical engineering documentation, taking into account existing manufacturer data and the housing with all its accessory parts, is configured in Eplan Cabinet as a 3D prototype.

The 3D model allows enclosures to be dimensioned, set up and checked, virtually instead of physically, long before the enclosure is manufactured. This ensures correct design data, exact planning and rapid implementation of the projects. Information about cut-outs and recesses, as well as for holes and threads, is transferred from the 3D model and fed through corresponding NC interfaces directly into the machining centre.

Optimised cutting lists for NC-supported cutting technologies can be generated simply from the 3D data, and will ensure precise fitting cable ducts and mounting rails. In addition all the advantages of automated wire preassembly take effect. An integrated 3D routing function determines the best possible routing, as well as the required conductor lengths within the enclosure. Completely preassembled conductors can then be rapidly installed.

Comments

Popular posts from this blog

What is Class I Division 2?

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

7/8 16UN Connectors that Provide 600 Volts and 15 Amps