EMB-9459T Supports Intel Atom N270 Up To 1.6GHz

Aaeon has introduced the EMB-9459T, which features the Intel Atom N270 processor. Intel Atom series processors offer small form-factor designs that are fanless and consume small amounts of power. Based on the Intel 945GSE+ICH7M platform, the EMB-9459T delivers mobile performance in today's most popular motherboard form factor, the mini-ITX.

The EMB-9459T supports an onboard Intel Atom N270 processor up to 1.6GHz (FSB: 533MHz) and one 240-pin DDR II DIMM that can support up to 2GB for system memory at speeds of 400/533. Two Realtek 8111C Ethernet controllers provide 10/100/1000Base-TX network connection to enable high-bandwidth communication. Ample storage expansion can be achieved through one Compactflash socket, one EIDE connector and two SATA II interfaces.

With eight USB2.0s, six COM ports and one parallel port, the demands of standard and special embedded markets are easily met. In addition to the storage and flexible I/O interfaces, the EMB-9459T offers peripheral expansion through one Mini-PCI, one PCI and two PCI-E[x1] in PCI-E[x4] through the use of a Riser Card. The onboard features, along with the available expansion capability of the EMB-9459T, offer advantages for reducing the cost of system integration.

With the integrated display chipset of the Intel 945GSE, the EMB-9459T allows for a variety of display interfaces, such as CRT, TV-out, 18-bit dual-channel LVDS (or 24-bit dual-channel through the use of the PER-V04B SDVO module), DVI and SDVO. The EMB-9459T supports CRT/LCD, CRT/DVI, LCD/DVI, CRT/TV, LCD/TV simultaneous/dual view displays. The integrated features of the EMB-9459T make it ideal for industrial automation, digital signage, entertainment, networking, transportation, banking, healthcare, interactive and multi-media applications that require high performance and reliability.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more