UEI DNA/DNR 1553 Interface Boards Added By Adept

Adept Scientific has added the DNA/DNR-1553-553 two-channel, dual redundant, 1553 bus interface boards from United Electronic Industries (UEI). Each board provides two independent, dual redundant bus interfaces for 1553 communication.

The DNA version is compatible with UEI PowerDNA and UEIPAC 'Cubes' while the DNR version is designed for use in UEI's 12- and six-slot Racktangle chassis. Each port may be independently configured as a bus controller (BC), remote terminal (RT) or bus monitor (BM). Designed to function in harsh environments, the DNA/DNR-1553-553 is fully tested for operation from -40C to +85C, 0-70,000ft and can withstand 5g vibration and up to 50g shock.

UEI's Cube architecture is a compact (4 x 4 x 4in or 4 x 4 x 5.8in) Ethernet-based I/O platform. It may be deployed in four different configurations. These are: Ethernet I/O systems slaved to a host PC; standalone data logger/recorder; Linux-based programmable automation controller (PAC); or Modbus TCP-based I/O slave. Each Cube consists of a core module (that holds the processor and network interface) along with three or six open I/O slots.

Users select the deployment option that meets their requirements. Users then match the Cube's I/O configuration to their application by selecting the appropriate boards. More than 25 I/O boards are available. The six-slot Cube provides up to 150 analogue inputs, 192 analogue outputs, 288 digital I/O, 48 counter or quadrature channels, 72 ARINC-429 channels, 24 Serial or CAN-bus ports or 12 1553 channels.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more