Powered by The New-Generation Intel® Xeon® E3-1200 Series with Intel® C206 Chipset, The SHB108 Provides Server-Grade Performance without Sacrificing Cost or Reliability

Axiomtek is pleased to announce the arrival of SHB108 PICMG 1.3 single board computer based on the Intel® C206 PCH, designed to support the new Intel® Xeon® E3-1200 series using LGA1155 socket. The high performance SHB108 comes with two (2) DDR3 1066/1333 MHz unbuffered ECC DIMM slots up to 16GB of system memory and six (6) SATA ports with RAID 0, 1, 10, 5. The PCI Express 2.0 is available on the new Intel® Xeon® processors to provide flexible x16, x4 or x1 lanes for versatile applications. The server-grade SHB108 is designed to provide higher performance with greater power efficiency and is ideal for applications such as network security, storage server, POS, kiosk, medical, gaming, digital signage, and surveillance security monitoring.

“Powered by the new-generation Intel® Xeon® processor E3-1200 series with Intel® C206 chipset, Axiomtek SHB108 supports DDR3 unbuffered ECC memory, SATA RAID, Intel® AMT 7.0, and dual Gigabit LANs for network-intensive applications. Intel® Core™ i3 processor is also supported on the SHB108. Features include Intel® Turbo Boost technology, Intel® Hyper-Threading technology and enhanced 3D performance. This high performance PICMG 1.3 slot CPU card also features an integrated Intel® VT, Intel® TPM 1.2 and Intel® AMT 7.0 for greater security and easier maintenance." ~ Roger Shyu, Product Manager of Product & Marketing Division at Axiomtek

In terms of I/O ports, the SHB108 offers fourteen (14) USB 2.0 ports, two (2) Gigabit LAN ports, VGA/DisplayPort (optional), HD audio, one (1) RS-232/422/485 port and one (1) RS-232 port. Data security and availability are enhanced by two (2) SATA-6Gb/s and four (4) SATA-3Gb/s ports with RAID 0, 1, 10, 5. The SHB108 provides reliable operation and non-stop capability with watchdog timer, as well as SMART FAN function controlling the fan speed to keep temperature within a specified range. This new generation SBC platform is fully compatible with Axiomtek's PICMG 1.3 full-size passive backplanes and we offer various industrial housing enclosures and have the capability to assist with any customer's industrial integration requirements.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more