Newport Announces SCG-02 Wavelength Extender

Newport Corporation, a worldwide leader in lasers and photonics solutions that Make, Manage and Measure Light®, introduces the SCG-02 Wavelength Extender to their line of nonlinear microscopy and spectroscopy application solutions. The Wavelength Extender is specifically designed as a modular solution for supercontinuum generation when used with femtosecond Ti:Sapphire lasers, such as Newport Spectra-Physics’ Tsunami®, MaiTai® DeepSee, and MaiTai ultrafast oscillators.

Ideal for a variety of spectroscopy and microscopy applications, the laser input is split into two parallel beams: a) the fundamental pump, and b) parallel, unfiltered broadband supercontinuum. This unique flexibility allows for both the external selection of particular spectra of interest, and the independent use or recombination of both beams. The fundamental beam passes through an integrated attenuator to enable precise control of the output power.

The SCG-02 is factory preassembled and pre-aligned and can be easily integrated into ultrafast light sources to provide turnkey solutions for multimodal spectroscopy and imaging. It can be used with two-photon microscopes for additional modalities and enhances pump-probe imaging and spectroscopy capabilities.

Features include manual controls to attenuate fundamental throughput and to generate parallel, broadband supercontinuum output. The robust and reliable device is designed to preserve the beam path and the tuning range of the pump source.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more