Bürkert Presents Flexible Solution for Integration of Actuators in Hygienic Processes

Through the combination of the valve terminal type 8640 or an AirLINE automation system type 8644 with an airline Quick adapter plate for direct mounting in control cabinets the fluid technology specialist Bürkert offers a flexible and especially compact solution for the pneumatic control of processes. The AirLINE Quick adapter and the corresponding connections are available in a high-quality stainless steel version which is recommended for use in all hygienic processes. Process safety features, such as check valves integrated in the exhaust air duct and a HotSwap function for replacing pneumatic valves during operation, round out the features of this solution for the hygienic process environment in the food, beverage or pharmaceutical industries.

Bürkert valve terminals and automation systems can be used in many different areas of hygienic processes and readily fulfil the high standards of this segment. This is ensured by the integrated process safety features of the valve terminal type 8640 and the automation system type 8644 - features which are especially important in hygienic processes. Check valves integrated in the exhaust air duct ensure that in the event that all actuators are shut down simultaneously during a disturbance in the system, no back pressure can accumulate in a valve block, which could result in unwanted switching of a valve, with serious consequences for the process. The time-tested HotSwap function allows replacement of faulty valves even during operation, without the risk of loss of air pressure on the entire valve block. The combination of a valve terminal or automation system with the AirLINE Quick adapter provides an especially compact system solution for even more flexibility in a smaller space.

Direct mounting in cabinet saves space, time and components

The AirLINE Quick mounting system consists of an adapter plate which is bolted on one side to the valve terminal or the AirLINE automation system and on the other side directly to the system's pneumatic connections. After it is connected, the adapter plate enables fast and easy mounting directly on the wall or floor of the control cabinet. An additional plate on the outside provides for added stability. For use in hygienic processes, the AirLINE Quick adapter plate and connections are available in a stainless steel model; for less critical application, a less expensive aluminium model with pneumatic connections made of nickel-plated brass is available.

With AirLINE Quick all pneumatic connections, the Fieldbus interface and the I/O modules can be mounted directly on the control cabinet floor or wall. This allows an altogether smaller design of control cabinets. Additional components such as hoses, cables or control cabinet connections are eliminated due to direct mounting in the floor or wall, further reducing the time needed for installation and commissioning.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more