Programmable All-in-One Positioning Controller

The EPOS2 P 24/5 from maxon motor is a freely programmable positioning controller. Applications are programmed to comply with the IEC 61131-3 standard. The controller matches with DC brush motors with encoder or brushless EC motors with Hall sensors and encoder up to 120 watts.

The EPOS2 P 24/5 fits seamlessly into maxon's existing range of easy to use positioning systems. Featuring all the characteristics of an EPOS2 positioning controller, this new master version also has an in-built processor and memory which permits standalone operation and independent control of up to 127 other devices through the CANopen bus. The controller boasts innovative features and functionalities and ultimately offers more flexibility, all of which are needed for automation tasks, in work equipment manufacturing or toolbuilding, for example.

With self-compiled programs, the programmable EPOS2 P 24/5 can autonomously control single and multiple axis systems through the CANbus. In addition it is possible to communicate with a superior process management level for supervisoring, controlling and data acquisition through CANopen, USB or RS232.

Editors (ST, IL, FBD, LD, SFC) of the powerful “EPOS Studio” tool are available for programming according to IEC 61131-3. The integrated project browser displays all network resources, allowing optimum management of complex programs with a large number of decentralized controls. Drive systems can be quickly configured and linked using intelligent step-by-step wizards. During commissioning, «Regulation Tuning» permits an extremely efficient adjustment of current, velocity or position regulation. Its integration into the graphic user interface «EPOS Studio» allows fast parameterization. This intelligent solution is easy to use and again highlights the benefits of the positioning controller.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more