Terminal Blocks - Entrelec By ABB Low Voltage

For over 50 years, Entrelec® By ABB Low Voltage has been one of the leading manufacturers of terminal blocks, with products in use all over the world. All terminal blocks are manufactured using only the highest quality materials and carry UL, CSA, VDE, IEC and other worldwide approvals. Entrelec® by ABB offers space savings, industry standard DIN rail mountable terminal blocks and a variety of colors, functions and connection technologies that customers demand.

Product Offering
  • Accessories
  • Mini Terminal Blocks
  • AMS 500 Marking Systems
  • PCB Connection Devices
  • ATEX Terminal Blocks
  • PLC Wiring System
  • Blocks for 5.08mm Connections
  • Power Terminal Blocks
  • Cable Management System
  • Screw Clamp Terminal Blocks
  • Distribution Terminal Blocks
  • Specific Terminal Blocks
  • IDC (ADO) Terminal Blocks
  • Spring Clamp Terminal Blocks
  • Test Connectors
The industry’s most identifiable termination technologies are:
  • Screw Clamp technology remains the most popular in connection devices.
  • Spring Clamp technology is a fast growing standard in screw-less connection.
  • IDC (insulation displacement connection) technology is the newest, fastest, and most innovative of screw-less connections.
In addition to general purpose terminal blocks, Entrelec® by ABB offers definite purpose products such as Distribution, 5.08mm connection, Power, Mini, ATEX , and Railway terminal blocks to satisfy the specialty needs of their customers. Terminal Blocks entrelec® by ABB's dedication to its customers is proven by offering FREE software to assist in rail design and operating a 24 hour hotline for orders.

Markets and applications include:
  • Process Control
  • Large and small panel building
  • Machine Tool
  • Energy/Utility
  • Railway/Transport
  • Chemical/Petrochemical
  • HVAC
  • Ship Building
  • Building Automation
  • Instrumentation
  • Utilities
  • Automobile

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more