Levelling Made Easy With Latexplan Trade

Mapei's premium latex levelling compound, Latexplan Trade is slower setting therefore suitable for rubbing down and is ideal for even the most budget conscious projects. Latexplan Trade is a two component self-levelling and smoothing compound, for the internal levelling of new or existing substrates, to prepare them to receive any type of floor covering.

A key benefit is its suitability for use on most substrates including: concrete floors, cement-based screeds, Mapei Topcem and Mapecem screeds, existing ceramic tile, terrazzo, natural stone, wood, steel and polyurethane. When used in conjunction with Mapeproof ESM surface membrane and Mapei's ECO adhesives, it provides the ideal system solution for fast-track, environmentally conscious projects.

This protein-free product is suitable for use on most projects, especially within public sector buildings due to its low odour and high compressive strength (sets to 30N/mm2); it has recently been specified for various projects across the country, including Bradford College, Tudor Grange Leisure Centre and Poole High School. Mapei is the world's largest manufacturer of adhesives, sealants and chemical products for building.

With over 70 years experience, Mapei is a specialist in the production of quality products for the installation of all types of wall and floor coverings, and has a vast range of admixtures and repair products for concrete and building materials.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more