Mahr Federal Introduces MMQ 200 Formtester

Mahr Federal has extended the capability of its MMQ Formtester line with the MMQ 200 Formtester, optimised for measuring cylindricity and other deviations of form and position. Equipped with Mahr's Easyform Version 3 Software, the MMQ 200 is said to be compact, fast and easy to learn and operate. It is suitable for use in metrology laboratories or on the shop floor. Pat Nugent, vice-president of metrology systems for Mahr Federal, said: 'The unit can be operated either by touch screen or by a keypad built right into the machine base.

'Using Easyform, no programming language is required for operation. 'Multi-feature measurement routines can be easily set up and saved and measurement operations are fast and virtually automatic.' EasyForm's teach-in mode remembers each step taken and can combine steps to perform multi-feature measurements. Up to 32 measuring routines can be saved for automatic operation via function keys. For example, a roundness measurement can be taken in two steps.

Measurement results are immediately displayed on the screen, including 3D representation, with colour or grid lines providing an interactive graphic preview. Results can be printed, saved in file formats such as PDF or exported for analysis in other software packages. This ease of operation makes the MMQ 200 suitable for use by machine operators right in production areas where immediate measurements can minimise scrap, save time and reduce production costs.

Optimised for the measurement of cylindricity through rotational table axis and vertical-axis integration, the MMQ 200 can also perform a range of ISO and/or ASME form checks. In particular, it carries out roundness, straightness, flatness (from a polar trace), parallelism, concentricity, coaxiality, run-out, total run-out, taper, perpendicularity, angularity, and angle sector (roundness, flatness, run-out) checks.

Key features include: three motorised axes, with both measuring axes (C and Z) optimised for high precision; computer and graphic-assisted test piece alignment on the manual tilting and centring table; a universal T20W test probe with a 2mm working range, stroke limitation and a mechanical probe zenith setting for high-precision measurements; Easyform measuring, control and evaluation software; a Pentium-class PC using Windows XP Professional; and a 15in (38cm) touch-screen monitor.

The MMQ 200 requires no outside air supply. Mahr Federal, a member of the Mahr Group, provides dimensional measurement solutions. The ISO 9001:2000-certified company, headquartered in Providence, Rhode Island, manufactures and markets a variety of dimensional metrology products. Mahr Federal's calibration system is accredited to ISO 17025 NVLAP Lab Code 200605-0.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more