Sensgard Offers Hardhat Adaptor For Hearing Models

Sensgard has introduced a hardhat adaptor that allows workers to use Sensgard hearing protection devices. The adaptor clips to the back of virtually any hardhat and is designed for use with either the Sensgard SG 26 or SG 31 hearing protection model. The system, combining either model with the hardhat adaptor, weighs less than two ounces (57g), but both components are rugged and durable, even in hot and cold temperature extremes.

The SG26 and the SG31 have noise-reduction ratings of 26 and 31 decibels respectively, making the Sensgard system suitable for use in extreme-noise environments, including construction, manufacturing, energy/utility/nuclear power plants, refineries and mining operations. The SG 26 and the SG31 incorporate patented ZEM technology, which uses the mechanical energy of sound waves instead of electronics to minimise sound before it reaches the ears.

The devices provide consistent protection without distortion across all frequencies. The wearer is fully protected from harmful noise but can still discern speech and other important ambient sounds. They cost significantly less than ear muffs and are much more cost effective in day-to-day use than ear plugs. Glasses and safety goggles will not compromise the product fit or performance. The lightweight hearing protection device and the adaptor are claimed to be comfortable to wear, even in hot, humid environments.

Comments

Post a Comment

Popular posts from this blog

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more