Kasto Supplies FOM Aluminium Cutting Line

Ideal for small- to medium-volume manufacturers of high-performance aluminium doors and windows, a cutting line from Italian machine builder, FOM, is now available in the UK from Kasto. The LT500 line is available in two versions, with either a fixed or roller-type unloading table, the latter capable of handling cut pieces of 5m and above.

Both models incorporate a cropper and step-in system to feed aluminium bars towards an NC manipulator arm with pneumatic gripper, which then advances the material up to a stop in the cutting area. Horizontal alignment of the bar, which can be up to 7m long, is by a pneumatic stop and magnetic sensor. The aluminium is clamped by manually-adjustable horizontal and vertical vices with jaws that are interchangeable to suit the profile type.

Cutting by the 500mm diameter blade of the single-head mitre saw can be at three fixed angles, 45, 90 or 135 degrees. Electrical adjustment of mitre angle from 30 to 160 degrees is an option. During the cutting process, off-cuts and swarf are removed via an internal chute. A series of blowers aims jets of air at the machining area to keep work surfaces as clear as possible of swarf.

They continue to blow after completion of the cut to finish the table-cleaning process before arrival of the next profile. Cut pieces are transferred onto a moving table with a non-scratch surface, and from there to the offload table. The 3-axis CNC system is connected to a Windows Vista PC, from where cutting order data is downloaded.

The PC has been designed to swivel towards the loading area to allow the operator to see the bar being fed through, or towards the unloading area to make it easier to use an optional labelling device. Procut software is able to create and save cutting lists, import and optimise external lists over a network or from a USB memory stick, manage profile archives containing sections and cutting parameters, and display profiles in DXF format while an order is being cut.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more