ETM831 Offers High Performance-Per-Watt

Axiomtek has introduced the ETM831, Intel Atom ETX 3.x compliant system-on-a-module with good performance-per-watt advantages for various multimedia devices. The ETM831 has compact footprint measuring 4.5 x 3.7in and integrates a high-performance, low-power 1.6GHz Intel Atom processor N270 with Intel 945GSE and ICH7M chipsets. The ETM831 supports up to 2GB of high-speed DDR2 system DRAM on a single Sodimm.

The Mobile Intel 945GSE Express chipset integrates an Intel Graphics Media Accelerator 950 that provides CRT and single/dual-channel 18/24-bit LVDS. The low-power module is said to be ideal for communication, medical, factory automation, transportation, and surveillance applications. Measuring 114 x 95mm, the compact ETM831 embedded platform comes with advanced connectivity and expansion interfaces including two Sata, four USB 2.0, one Fast Ethernet, VGA, 18/24-bit LVDS, AC'97/HD audio, PS/2 keyboard/mouse port, 2 UARTs ports, FDD/LPT port, and Irda interface (optional).

A watchdog timer is included to keep system running smoothly. The ETM831 supports Windows 7, Windows Vista, Windows XP, Windows Embedded Standard, Windows XPe, Windows CE, Linux as well as QNX. The RoHS-compliant product will be available around the end of February 2010.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more